1. 100 MHz bandwidth, 1GSa / s real-time sampling rate. 2. 2 channels. 3. 25kpts memory depth. 4. 20,000wfms / s waveform acquisition rate. 5. Time base 2ns / div ~ 50s / div. 6. Trigger modes: Edge, pulse width, Runt, over amplitude, slope and video. 7. Calibration signal output: 10Hz, 100Hz, 1kHz (default), 10kHz and 100kHz. 8. Enter the calibration signal only by pressing a button. 9. 10Mpts waveform recording. 10. 8 inch TFT LCD, WVGA (800 × 480). 11. USB OTG and Pass / Fail interfaces.
| Specification | UTD2072CEX-II | UTD2102CEX-II | |
| Channel | 2 | 2 | |
| Bandwidth | 70MHz | 100MHz | |
| Sample rate | 1GS/s (single channel), 500MS/s (dual channel) | ||
| Rise time | ≤5ns | ≤3.5ns | |
| Memory depth | 25kpts | ||
| Waveform acquisition rate | ≥20,000wfms/s | ||
| Vertical sensitivity (V/div) | 1mV/div~20V/div (1MΩ) | ||
| Time-base range (s/div) | 2ns/div~50s/div | ||
| Storage | Setup, Waveform, Bitmap | ||
| Trigger mode | Edge, Pulse Width, Runt, Over amplitude, Video, Slope | ||
| Trigger frequency | 6 bits | ||
| Trigger type | Auto, normal, single | ||
| Pluse Width range | 100ns~10s | ||
| Signal mode and Line/Field | Supports standard NTSC and PAL signal mode, line range is 1~525 (NTSC) and 1~625 (PAL) | ||
| Auto measurement | Max, Min, Peak-Peak, Amplitude, Top, Bottom, Cycle Average, Average, Crms, RMS, Area, Cycle area, Overshoot, Preshoot, RPRE, FPRE, Rise Time, Fall Time, Frequency, Period, Pulse Width, +Width, -Width, Burst Width, +Duty, -Duty, Phase, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF, 34 measuring parameters in total | ||
| Storage waveform | 20 internal settings/waveform, 200 settings/waveform in U disc, deep storage CSV in U disc | ||
| Interface | USB OTG, Pass/Fail | ||
| General Characteristics | |||
| Power | 100~240VACrms, 50/60Hz | ||
| Display | 8-inch TFT LCD, 800×RGB×480 | ||
| Product color | White and gray | ||
| Product net weight | 3.35kg | ||
| Product size (W×H×D) | 336mm × 164mm × 108mm | ||
