1. Bande passante de 100 MHz, taux d’échantillonnage en temps réel 1GSa / s. 2. 2 canaux. 3. profondeur de la mémoire 25kpts. 4. Taux d'acquisition de la forme d'onde de 20 000wfms / s. 5. Base de temps 2ns / div ~ 50s / div. 6. Modes de déclenchement: Edge, largeur d'impulsion, Runt, sur-amplitude, pente et vidéo. 7. Sortie du signal d'étalonnage: 10Hz, 100Hz, 1kHz (par défaut), 10kHz et 100kHz. 8. Entrer le signal d'étalonnage uniquement en appuyant sur un bouton. 9. Enregistrement de forme d'onde 10Mpts. 10. LCD TFT 8 pouces, WVGA (800 × 480). 11. USB OTG et interfaces Pass / Fail.
Specification | UTD2072CEX-II | UTD2102CEX-II | |
Channel | 2 | 2 | |
Bandwidth | 70MHz | 100MHz | |
Sample rate | 1GS/s (single channel), 500MS/s (dual channel) | ||
Rise time | ≤5ns | ≤3.5ns | |
Memory depth | 25kpts | ||
Waveform acquisition rate | ≥20,000wfms/s | ||
Vertical sensitivity (V/div) | 1mV/div~20V/div (1MΩ) | ||
Time-base range (s/div) | 2ns/div~50s/div | ||
Storage | Setup, Waveform, Bitmap | ||
Trigger mode | Edge, Pulse Width, Runt, Over amplitude, Video, Slope | ||
Trigger frequency | 6 bits | ||
Trigger type | Auto, normal, single | ||
Pluse Width range | 100ns~10s | ||
Signal mode and Line/Field | Supports standard NTSC and PAL signal mode, line range is 1~525 (NTSC) and 1~625 (PAL) | ||
Auto measurement | Max, Min, Peak-Peak, Amplitude, Top, Bottom, Cycle Average, Average, Crms, RMS, Area, Cycle area, Overshoot, Preshoot, RPRE, FPRE, Rise Time, Fall Time, Frequency, Period, Pulse Width, +Width, -Width, Burst Width, +Duty, -Duty, Phase, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF, 34 measuring parameters in total | ||
Storage waveform | 20 internal settings/waveform, 200 settings/waveform in U disc, deep storage CSV in U disc | ||
Interface | USB OTG, Pass/Fail | ||
General Characteristics | |||
Power | 100~240VACrms, 50/60Hz | ||
Display | 8-inch TFT LCD, 800×RGB×480 | ||
Product color | White and gray | ||
Product net weight | 3.35kg | ||
Product size (W×H×D) | 336mm × 164mm × 108mm |